
Transform any space in your home into a personal wellness escape with the compact Finnmark FD-1 Full Spectrum, 1-Person Infrared Sauna. The only infrasauna in the industry that combines UL Listed Spectrum Plus™ infrared heaters with Spectrum Carbon 360° which allows you to reach temperatures of 170° in less than 1 hour on a standard home outlet for a healthy sweat. While others try to compete, they can’t compare to the quality and craftmanship of Finnmark Design’s infrared saunas.
Antimicrobial Western Canadian cedar interior resists mold, bacteria, and fungus to keep your sauna free from unpleasant odors. Thermal Plus™ Aspen exterior is organically treated with heat and steam so that it won’t rot, warp, decay, or chip, making Finnmark Designs full spectrum IR saunas one of the most durable and longest-lasting saunas on the market.
Finnmark Designs is the only infrared sauna manufacturer that combines long-wave carbon 360 infrared panels with UL listed short-wave Spectrum Plus™ infrared panels. This combination provides higher temperatures, full body coverage, deeper penetration, and a better sweating experience - better than any other IR sauna. Each heater is strategically placed to offer the highest level of therapy possible.
Spectrum Plus™ are UL listed. Short wave infrared heaters create deep penetrating heat, up to 25x more than standard carbon panel heaters. Spectrum Carbon long wave infrared heaters are engineered to produce 360° of pure infrared. Spectrum LED near infrared ceiling lights combine with medical grade color therapy.
FEATURES
- Antimicrobial Western Canadian cedar interior that protects against mold, bacteria and fungus.
- Thermal Plus™ Aspen exterior that will never rot, warp, decay or chip. Making Finnmark Designs full spectrum infrared saunas one of the healthiest and longest lasting saunas on the market.
- Finnmark Designs is the only infrared sauna manufacturer that combines long-wave carbon 360 infrared panels with UL listed short-wave Spectrum Plus™ infrared panels. This combination provides higher temperatures, full body coverage, deeper penetration and an experience better than any other sauna. Each heater is strategically placed to offer the highest level of therapy possible.
- Built-in LCD touchscreen controller with Bluetooth audio.
- Audio with 6"" HiFi speakers, 8mm tempered glass for the ultimate thermal retention.
- Ergonomic backrest for comfort
- Removable and adjustable sauna feet for uneven surfaces.
- Low EMF sauna tested by a NASA award winning testing facility.
- High Emissivity infrared heaters
- High quality double walled construction with non-toxic wool insulation.
- Over 15,000 Sold
HEATING SYSTEM
- Two Spectrum Plus dual wave heaters (far and mid) sit on the back wall, one sits under the bench, and two Spectrum Carbon 360 far infrared panels sit on each sidewall.
- Spectrum Plus heaters are UL Listed short wave infrared, for deep penetrating heat, up to 25x more than standard carbon panel heaters.
- Spectrum Carbon heaters are long wave infrared, engineered to produce 360 degrees of pure infrared.
- Spectrum LED near infrared ceiling lights combine with color therapy.
- Spectrum Plus heaters carry a third party tested Low EMF certification.
- Finnmark gives an estimated operational life of 40,000 hours for Spectrum Plus heaters and about 30,000 hours for carbon 360 heaters.
- Reaches 170 degrees F in less than an hour.
- Back wall heater part 614-SP300, Spectrum Plus Incoloy 120V / 300W. Side wall heater part 614-FD-C3, Carbon 120V / 300W.
INSTALLATION AND ELECTRICAL
- Plugs into a standard 120v 15a outlet. Plug type NEMA 5-15P.
- Requires a dedicated 15A circuit, receptacle type NEMA 5-15.
- The sauna is freestanding and self contained. It must not be built into any structure.
- Allow a minimum of 3 inches of clearance from the top wall and all sides.
- Place it on a solid, dry surface. It is intended for indoor use.
- Panel assembly. The bottom, back, left, right and ceiling panels screw together with M5 (5 x 68mm) back wall screws and M4 (4 x 50mm) front wall screws. Two people are needed to hold the panels. Tools needed are a screwdriver, a level and the parts box.
- In the United States install to ANSI/NFPA 70 National Electrical Code. In Canada install to CSA C22.1 Canadian Electrical Code.
- The serial number is on the data plate underneath the sauna bench.